Club Event Grain-Yeast Request

FORM INSTRUCTIONS – Please Read

To obtain grain, malt extract, or yeast for a club subsidized event please fill out form below and make sure all required fields are filled before submitting. Make sure you supply the name of the event in the field provided. Other instructions or limitations are as follows:

1. Member can submit one 5 gallon recipe only.

2. Please bring the full 5 gal of finished beer to the event.

3. Limit on grains is four types per recipe. You can add more on your own.
4. There is a limit of 15 lbs total grain/malt for a 5 gal batch that the club will cover. If brewing a 10 gal batch you will need to cover the extra grain and yeast yourself. You can add the the extra ingredients at the bottom of the form and will need to contact the Wine & Hop shop in regards to payment.
5. For Extract and Partial Mash Brewers there is limit based on malt cost equivalency that adheres to the limits above. Details can be found in the extract section of this form.
6. Please give at least 3 working days notice if picking up at the Wine and Hop Shop and a 4 working days notice if picking up from the Working Draft location.
7. The Wine and Hop Shop is closed on Wednesdays; Deliveries to Working Draft are only done on Fridays.
8. One yeast package per request.
9. Outside of the grain and yeast as explained above you’re on your own for any other items or ingredients. However you can add these other items in the field provided towards the bottom of this form. These items will need to be paid for by the member by contacting the Wine and Hop Shop.
10. If your grain request is approved you will receive an email confirmation. Pickup date/time will be confirmed by the Wine and Hop Shop. Members who fail to pickup an approved requested order from the selected location may be removed from this program.
11. Approved submissions based on club sponsored events will not count against your club member grain benefit program submissions.

If you need dry or liquid malt extract please use the drop down fields below. All selections are normally available at the Wine & Hop Shop. Each selection has a package weight displayed. Please remember you are allowed a total malt cost equivalency of 10 pounds for 5 gallon batches.

For the sake of calculating malt cost equivalency:

• 1 lb of DME is equivalent to 3 lbs grain
• 1 lb of LME is equivalent to 1 ⅔ lbs grain

You have selected too much grain or equivalent extract. You are limited to 15 pounds for a 5-gallon batch.

Please choose your Batch Volume size from the Brew Information section or lower your amount of grain to show “Submit” button!